D Duzzi Well-known member Lifetime Membership Sep 30, 2013 103 74 28 Oct 26, 2014 #1 Anyone have a break down on pulling the Diamond drive apart? I have new bearings and seals I want to install. I have done it on a 06 m7 without reverse. Any tips or links would be appreciated.
Anyone have a break down on pulling the Diamond drive apart? I have new bearings and seals I want to install. I have done it on a 06 m7 without reverse. Any tips or links would be appreciated.
A arctic2009 Well-known member Nov 19, 2009 1,864 670 113 Minnesota Oct 27, 2014 #2 pull up a parts breakdown from any parts finder websites. country cat has one on their website.
av8er Well-known member Lifetime Membership Sep 16, 2006 4,538 1,241 113 Kalispell, MT. Oct 27, 2014 #3 x2 pull the rubber stopper out, and take out the 4 torx screws by the toe hold side plate. then remove all DD bolts, bang on it a little from the back side with a rubber hammer.
x2 pull the rubber stopper out, and take out the 4 torx screws by the toe hold side plate. then remove all DD bolts, bang on it a little from the back side with a rubber hammer.