J
Hey guys I just picked up this 09 m8 with what I believe is the race gas turbo setup on it. Has secondary injectors the 2d box with the EBC setup. It has a fresh top end with maybe 2hrs on it along with the torque line head. Previous owner had no history on the sled other than he bought it blown up.
The issue I’m having is that the sled seems to idle great but won’t rev past 4500 and starts to only run on one cylinder. The numbers in the control box are all over the place and boondocker has been little to no help getting a base line to start from. Any help or insight would be greatly appreciated. Fighting with the ecu code 21 also even after replacing the sensor.
The issue I’m having is that the sled seems to idle great but won’t rev past 4500 and starts to only run on one cylinder. The numbers in the control box are all over the place and boondocker has been little to no help getting a base line to start from. Any help or insight would be greatly appreciated. Fighting with the ecu code 21 also even after replacing the sensor.
