3" powerclaw fit in an m?
- Thread starter kidwoo
- Start date
I will say yes!
I know a person who knows a person, that said yeah!
Also rode with a few M's with 3in tracks.
U will need the 3in claw with the sall outer drive nubs so that it will clear the DD.
I know the 16-17's had the small nubs.
The 2018 had the large nubs.
I think the difference in part#'s is the old one starts with a 2 and the new one starts with a 3.
Sent it
I know a person who knows a person, that said yeah!
Also rode with a few M's with 3in tracks.
U will need the 3in claw with the sall outer drive nubs so that it will clear the DD.
I know the 16-17's had the small nubs.
The 2018 had the large nubs.
I think the difference in part#'s is the old one starts with a 2 and the new one starts with a 3.
Sent it
Oh yeah, almost forgot, for my advice , u can send me beers.....
Sent it
Sent it
Yes it will fit. Put an older one with the smaller nubs on a 2009 M1000. If you bottom out the rear suspension the tips of the claws will touch the back of the tunnel and rough them up a little.
Yes - I did this on my son's M7. 162 Powerclaw in his 153 M7 is pretty cool. Great sled for him to learn on as the thing would rarely get stuck.
Depends on year. 07-08 M-series with the mechanical diamond drive had a larger case, so the outer nubs need to be trimmed down to clear. The tunnel cooler is tight clearance, but it will fit. (I had a 3” PC on an 07 with a BDX diamond light drive, no reverse, same cases as the previous M7’s that didn’t have reverse).
I would be concerned about something getting jammed between the track and front cooler. It wouldnt require as large of object to jam and possible damage cooler, like a rock or maybe ice or tree branch?
