• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

need advice: starter mods and clutching

B
Nov 6, 2014
1
0
1
Hey guys, first time poster so ill try and keep it short and to the point
I drive a 2010 m8 153" sno pro all stock, looking to add some hp this winter.
wanting to get all my parts from Canada
looking to spend around $1500
so far I've looked into bikeman performance parts, looking at:
exhaust manifold
silencer (possibly add the single pipe down the road)
fuel controller (mines a lucky one that bogs with a can and they come pretuned if bought through bmp)
intake kit
just wondering what everyones opinion of this set up is or if there is something different you recommend (keep in mind the budget)
ALSO wondering what the best option for a clutch kit or changing the clutching would be, I ride low altitude (Saskatchewan) but may be making a trip further west this winter.
Thanks in advance!
 

Thunder101

Well-known member
Premium Member
Feb 7, 2008
1,303
191
63
I'm from Sk also. :)
I would make sure your clutches and clutching is good , a straight 40 helix will help at low elevation.
D&D Y pipe
Power commander 5 ( used is like 250/300 )
A/F gauge and dial in your fuel map and you will be very happy.

No matter what parts you bolt on you need to dial in your A/F. On this engine I would not spend much on bolt on stuff.
 
Premium Features